OMAX 5555 Precision JetMachining Centre

Enquire for price

SKU O5555

Category Parts & Accessories, Toolboxes, Brackets & Straps, Fuel Tanks, Square Toolboxes, Fuel Caps, Filler Breathers, Hydraulic Filters, Licence Holders, Latches, Level Temperature Gauges, Fuel Tanks, Hydraulic Tanks, Combination Tanks, Water Tanks, Air Tanks, Fuel / Combination Tank, Round Combination Tanks, Round Hydraulic Tanks, Tapered Front Toolboxes, Square Hydraulic Tanks, Oval Square Hydraulic Tanks, Round Fuel Tanks, Square Fuel Tanks, Oval/Square Fuel Tanks, Oval Square Combination Tanks, Replacement Parts, Hydraulic Tank, Toolbox, Gas Stays, Tank Top Filters, Available Now, Toolbox Parts, Domett, Toolboxes, Dunnage Boxes, Replacement Doors, Cornerboard Boxes

Features

The OMAX 5555 JetMachining Centre is a perfect fit for shops needing a machine with a smaller footprint but provides top performance in waterjet machining of complex parts from many materials. From simple metals to complex composites, the 4' 7� square cutting area of the proven 5555 is ideal for rapid prototyping and just-in-time manufacturing of small to medium-sized parts. With simple fixturing and easy access to the cutting table, setup times are significantly reduced, increasing productivity and profitability. Waterjet system includes a EnduroMAX pump and software.

OMAX Benefits

Fastest cutting speeds and best precision compared to any competitive abrasive waterjet in the industry.
Backed by our exclusive IntelliMAX Premium Software with real world cutting data.
Robust and accurate design for tight tolerance cutting and reliable operation.
Easy operator access to the work area.
Small, efficient footprint for minimal floor space utilisation.
Precision X-Y Axis rigidly mounted to the cutting table.
Pre-loaded linear bearings and precision ball screws.
Drive system sealed against water, dirt, and grit.
No tool changes & minimal fixturing dramatically reduce setup.
Machines a wide range of materials and thicknesses, from metals and composites to glass and plastics.
Leaves behind a satin-smooth edge, reducing secondary operations.
Does not create heat-affected zones or mechanical stresses.
Environmentally "green" system uses only natural garnet abrasive and water in the cutting process.
No noxious gases, liquid or oils used in, or caused by, the machining process.
Shipped as a completely pre-assembled and factory-tested system.
Designed and manufactured at the OMAX factory in Kent, Washington, USA.
Standard programmable Motorised Z-Axis with a precision OMAX MAXJET 5i Nozzle boosts productivity and process efficiency.
Standard IntelliCAM software program is available with two tools in one that can generate either 2D or 3D tool paths from 3D models.
Standard IntelliVISOR SE System Monitoring offers predictive maintenance and system monitoring to minimise unexpected downtime.
Standard scissor-style hard plumbing adds another level of safety by using contained high-pressure components, as well as contributes to a smaller footprint, lower maintenance, and higher reliability.
Standard Rapid Water Level Control for cleaner, safer, and quieter submerged cutting completes most work below 80 dB.
Optional Bulk Abrasive Delivery System transports garnet from the assembly's large hopper into the Zero Downtime Hopper located on the Z-Axis.
Optional Tilt-A-Jet taper eliminating abrasive jet cutting head.
Optional Variable Speed Solids Removal System (VS-SRS) designed for industrial use increases uptime through automated solids removal.
High efficiency EnduroMAX pump system available in 30 HP, 40 HP or 50 HP with operating efficiencies up to 85%.
EnduroMAX pump technology delivers the highest nozzle horsepower in the industry for faster and more efficient cutting.
Highly robust and reliable pump design capable of up to 1,000 hours between maintenance.
Uses substantially less cooling water than inefficient hydraulic intensifier pumps.
Lowest electrical consumption compared to other pump technology.

Drive Description

Closed loop digital drives, brushless servo motors, pre-loaded ball screws with recirculating ball bearings, linear bearings with hardened precision ground ways, Cantilever Y-Axis on bridge and X-Axis.

Additional Notes

All products meet rigorous international standards and requirements.
Accuracy Specifications are based on a water temperature of 22�C..
OMAX reserves the right to adjust specifications without notice.
Install according to local electrical code.

* Footprint does not include controller or pump.
**With standard scissor plumbing.
*** Additional accessories may reduce travel.
**** Recommended maximum orifice size. Smaller orifice sizes have a corresponding lower flow rate.

Specifications

Machine Footprint* (L x W):	3,480 mm x 2,670 mm
Height **:	2,997 mm
Weight (Tank Empty):	2,854 kg
Operating Weight:	5,897 kg
X-Y Cutting Envelope***:	1,390 mm x 1,390 mm
Z-Axis Travel***:	203 mm
Table Size (L x W):	2,032 mm x 1,651 mm
Material Support Slats:	102mm x 3mm Galvanised Steel
Max Supported Material Load:	1950kg/m2
Electrical Requirements:	3 Phase 380-480 VAC +/- 10% 50-60 Hz
Noise Level:	Below 80 dB at one metre for submerged cutting
Speed:	4,572 mm/min
Linear Positional Accuracy:	±0.025 mm
Repeatability:	±0.025 mm
Ballbar Circularity:	±0.064 mm

Additional Options

Tilt-A-Jet Cutting Head for Taper Compensation, Variable Speed Solids Removal System (VS-SRS), Collision Sensing Terrain Follower (with Tilt-A-Jet only), Z-Axis Pneumatic Drill, Precision Optical Locator (POL), Rotary Axis, Laser Finder Feature, Water-only MAXJET 5 Nozzle, OMAX Mini MAXJET 5i Nozzle Assembly, Manual Tilt Z, Waterjet Brick Kit, Material Holding Kit, Bulk Abrasive Delivery Assembly, Extended Slat Package, Air & Water Conditioning Kit, Splash Shield Kit.

OMAX 5555 Precision JetMachining Centre

Features

Specifications

Additional Options

You may also like

Select Options

Toolbox Shelf for 0-600mm Long Toolboxes

Toolbox Channel Bracket Single Mount

Newsletter

Subscription

VISIT OUR EQUIPMENT SUPPLY BUSINESS

Call Our Office

06 322 1575

OMAX 5555 Precision JetMachining Centre

Features

Specifications

Additional Options

Questions?

You may also like

VISIT OUR EQUIPMENT SUPPLY BUSINESS

Call Our Office